Category

PUGRAD BP-300 is used in places where high resistance against impact, thermal shock, abrasion and chemical materials is needed. This flooring has good resistance against the vapor and hot water of cleaning machine.

NITOFLOR-EP is designed for industry places which the life time of flooring is important. It creates compressed, uniform, seamless and resistant surface against most of the chemicals after execution. Besides, it’s hygienic and it can be clean easily and it’s produced in different colors. It’s produced as two components (resin, hardener) system which create smooth and glaze surface after execution. Its produced in standard colors. It has good chemical resistant against most of the chemicals in ordinary temperature. It’s better to clean the surface after spilling chemical materials on it. This is for evaporation and increasing of material’s concentration. Epoxy materials are not flammable due to being solvent free.

PEP-100 is a transparent two components with the structure of a modified Epoxy poly amide primer which doesn’t have solvent and has very low viscosity. This is the best preparer of concrete substrate before executing kinds of covers due to the high cohesion and permeability strength.

Pls-100 is a concrete hardener and polisher based on lithium and its aqueous solution, transparent and mineral. This product is liquid and it can lead to closing of porosity and capillary tubes. It also prevent from penetrating particles of water, vapor, oil and destructive gases due to penetrant into concrete and cement surface texture in addition to reacting with calcium salts and magnesium. It also anti-dandruff the concrete and cement surfaces by absorbing calcium and lime compounds. In addition to losing the absorbing and penetrant centers, resistant concrete surfaces with silicate penetrant hardener based on lithium leads to increasing the abrasion resistance and reduction of permeability.

STAMP CONCRETE is the most widely used constructional material which has made new manifestations that one of them is decorative concrete. This product is based on cement and hard minerals and industrial slags with additives according to international standards. This product is executed at the same time with floor concretes. It Is also executed in different designs and color using different stamps.

This product is produced from hard minerals and industrial slags with cement and authorized additives according to international standards. This product is executed with concrete floor at the same time and in the end the final cover is achieved by 1 to 2 cm thickness. HARDMELAT is produced in different colors from granules with 0.75-15 mm diameter and 7-8 hardness in Mohs scale.

HARDTOP-BP2000 is produced in different colors and it includes mineral aggregates, cement, special additives, pigments, … Which is executed by dry shotcrete method on fresh concrete surfaces. This dry shotcrete powder create permanent protection against repeated use, impacts and abrasion for concrete surfaces after execution.

HARDTOP-BP3000 is produced in different colors and it includes mineral aggregates, cement, special additives, pigments, … Which is executed by dry shotcrete method on fresh concrete surfaces. This dry shotcrete powder create permanent protection against repeated use, impacts and abrasion for concrete surfaces after execution.